SAM IO Driver
Description
MANUALLY OPERATED DRIVER
SAM IO is a manually operated intraosseous access system. Catheter placement is achieved by continuously actuating (repeatedly compressing) the driver’s trigger assembly while gently guiding needle assembly into position. Repeated, full trigger actuation creates rotational spin of the needle assembly which, when combined with gentle downward pressure, results in controlled IO placement. Once needle assembly is properly positioned, the stylet is removed to expose standard Luer-lock for extension set connection. With the extension set connected, aspiration verification, flushing and selected treatment(s) may commence.
Features
1. SAM IO NEEDLES
A stylet and catheter assembly secured by a press-fit connection. 15 mm, 25 mm, and 45 mm lengths are intended to address a broad range of patient demographics and multiple application sites.
2. NEEDLEVISE® BLOCK
Included in every Needle Set. Single-use sharps containment device for the stylet.
3. SAM IO DRIVER
Light weight (2.5 oz), a multi-use manually operated intraosseous access driver. The driver, made of a rugged Polycarbonate, was tested for over 10,000 actuations and meets MIL STD 810G.
4. SAM STABILIZER
Cylinder design intended to protect the catheter from dislodgement.
5. EXTENSION TUBING
Connects to the catheter for flexible infusion.
6. SAM IO NEEDLE ADAPTOR
Attaches to the SAM IO Driver to accommodate alternative IO needles
Specifications
DRIVER SIZE & WEIGHT:
- Length: 5.5”
- Width: 1”
- Height: 4.25”
- Weight: 2.5 oz